FLIR™ A325
High Resolution, Plug & Play, GigE Infrared Camera System for Machine Vision!
The affordable A325 is designed for integration into machine vision and automation systems that require non-contact imaging and temperature measurements. It operates similar to a sophisticated visual cameras used in industrial applications, and has standard interfaces for easy deployment and connection to back-end systems and networks via Gigabit Ethernet.
The A325 is an affordable way to add thermographic imaging and non-contact temperature measurements to machine vision systems. Adding this IR functionality is no more complex than adding a visual image camera, and provides a similar level of flexibility in developing the command and control program.
Check out these great features:
• GenICam and GigE Compliant
• Plug-and-Play Compatibility
• Third Party Software Compliant (NI Vision Builder, IMAQ, Common Vision Blox, Visual Basic, Visual C++, etc.)
• Supported by FLIR Software Packages
• Precision Non-contact Temperature Measurements
• Maintenance-free, Uncooled, Microbolometer Detector
• Longwave Imaging Performance
• Compact, Rugged, and Lightweight
Accurate Non-contact Temperature Measurement
The A325 is designed to deliver accurate thermographic imaging and repeatable temperature measurements in a wide range of applications. Each thermal image is built from over 76,000 individual picture elements that are sampled by the camera's on-board electronics and firmware. The data can then be used to monitor and help control a production process or automation system.
Easy Plug and Play Operation
The A325 is an ideal system integration solution due to its universal plug and play (uPnP) protocol and GigE Vision Control protocol. Simply connect the camera to a PC and produce high-quality near-real-time thermographic images. With a standard PC interface, the camera can be fully configured from the PC, allowing command, control and collection of full frame data from the A325 in real time.
Gigabit Ethernet Data Transfer
The A325 Researcher is equipped with an RJ-45 Gigabit Ethernet connection that supplies 16-bit 320x240 images at 60 Hz, and linear temperature data. These signals are compatible with any software that is GenICam compliant.
Precise Timing and Control
There are separate digital I/O connections to eliminate communication latencies in timing and control. Two types of optically isolated connections are provided. The GPIO allows digital-in for shutter disable, and digital-out for program control. There is also a V-sync connector for triggering and synchronization.
Compact, Rugged, and Lightweight
Compact and lightweight, the powerful A325 fits easily into most machine vision and automation systems. Its straightforward 3-sided mounting allows quick installation, and it can be easily moved when application requirements change.
Tailored To Your Application
As with all its products, FLIR Systems offers a complete series of accessories, including close-up and wide-angle lenses, to suit the most demanding applications. The A325 is supported by a variety of FLIR software packages, including Researcher 2.9 for R&D or as a pre-configured Automation HMI, Software Developer's kit for Visual Basic and Visual C++ programming and LabView Toolkit for seamless compatibility with National Instruments LabView software.
What do all FLIR Infrared Cameras have in common?
The FLIR A325 comes with the FLIR name behind it. That means it incorporates FLIR's 30+ years of experience in thermal imaging. You get superior ergonomics, advanced signal processing, ambient temperature control and a host of other infrared camera and thermal imaging exclusives. FLIR offers the widest selection of IR cameras and thermal imagers, the best post-sale technical support, the world's largest and most experience thermal imaging training organization - the Infrared Training Center - and award-winning customer service. Our core business is infrared thermal imaging. We invite you to call and speak with an infrared camera or thermal imaging expert at 1 800 464 6372.
Related Cameras
View By IndustryDemo Request
Thank you for your interest in FLIR infrared cameras. Please answer just a few questions below, so we can get you the information you need.
If so, please help us by completing the following form:
FLIR™ A325
High Resolution, Plug & Play, GigE Infrared Camera System for Machine Vision!
The affordable A325 is designed for integration into machine vision and automation systems that require non-contact imaging and temperature measurements. It operates similar to a sophisticated visual cameras used in industrial applications, and has standard interfaces for easy deployment and connection to back-end systems and networks via Gigabit Ethernet.
The A325 is an affordable way to add thermographic imaging and non-contact temperature measurements to machine vision systems. Adding this IR functionality is no more complex than adding a visual image camera, and provides a similar level of flexibility in developing the command and control program.
Check out these great features:
• GenICam and GigE Compliant
• Plug-and-Play Compatibility
• Third Party Software Compliant (NI Vision Builder, IMAQ, Common Vision Blox, Visual Basic, Visual C++, etc.)
• Supported by FLIR Software Packages
• Precision Non-contact Temperature Measurements
• Maintenance-free, Uncooled, Microbolometer Detector
• Longwave Imaging Performance
• Compact, Rugged, and Lightweight
Accurate Non-contact Temperature Measurement
The A325 is designed to deliver accurate thermographic imaging and repeatable temperature measurements in a wide range of applications. Each thermal image is built from over 76,000 individual picture elements that are sampled by the camera's on-board electronics and firmware. The data can then be used to monitor and help control a production process or automation system.
Easy Plug and Play Operation
The A325 is an ideal system integration solution due to its universal plug and play (uPnP) protocol and GigE Vision Control protocol. Simply connect the camera to a PC and produce high-quality near-real-time thermographic images. With a standard PC interface, the camera can be fully configured from the PC, allowing command, control and collection of full frame data from the A325 in real time.
Gigabit Ethernet Data Transfer
The A325 Researcher is equipped with an RJ-45 Gigabit Ethernet connection that supplies 16-bit 320x240 images at 60 Hz, and linear temperature data. These signals are compatible with any software that is GenICam compliant.
Precise Timing and Control
There are separate digital I/O connections to eliminate communication latencies in timing and control. Two types of optically isolated connections are provided. The GPIO allows digital-in for shutter disable, and digital-out for program control. There is also a V-sync connector for triggering and synchronization.
Compact, Rugged, and Lightweight
Compact and lightweight, the powerful A325 fits easily into most machine vision and automation systems. Its straightforward 3-sided mounting allows quick installation, and it can be easily moved when application requirements change.
Tailored To Your Application
As with all its products, FLIR Systems offers a complete series of accessories, including close-up and wide-angle lenses, to suit the most demanding applications. The A325 is supported by a variety of FLIR software packages, including Researcher 2.9 for R&D or as a pre-configured Automation HMI, Software Developer's kit for Visual Basic and Visual C++ programming and LabView Toolkit for seamless compatibility with National Instruments LabView software.
What do all FLIR Infrared Cameras have in common?
The FLIR A325 comes with the FLIR name behind it. That means it incorporates FLIR's 30+ years of experience in thermal imaging. You get superior ergonomics, advanced signal processing, ambient temperature control and a host of other infrared camera and thermal imaging exclusives. FLIR offers the widest selection of IR cameras and thermal imagers, the best post-sale technical support, the world's largest and most experience thermal imaging training organization - the Infrared Training Center - and award-winning customer service. Our core business is infrared thermal imaging. We invite you to call and speak with an infrared camera or thermal imaging expert at 1 800 464 6372.