InSb Laboratory Camera
The InSb Laboratory Camera is a high-performance mid-wave infrared (MWIR) camera system based on an Indigo ROIC based focal plane array (FPA). This is either a 320 x 256 or 640 x 512 format Indium Antimonide (InSb) snapshot mode FPA. InSb exhibits excellent sensitivity over the 3.0–5.0 micron waveband, the standard bandpass for the camera. However, the laboratory configuration allows changing dewar windows and cold filters to support passbands between 1.5 to 5.0 microns.
What do all FLIR Infrared Cameras have in common?
The InSb Laboratory comes with the FLIR name behind it. That means it incorporates FLIR’s 30+ years of experience in thermal imaging. You get superior ergonomics, advanced signal processing, ambient temperature control and a host of other infrared camera and thermal imaging exclusives. FLIR offers the widest selection of IR cameras and thermal imagers, the best post-sale technical support, the world’s largest and most experience thermal imaging training organization – the Infrared Training Center – and award-winning customer service. Our core business is infrared thermal imaging. We invite you to call and speak with an infrared camera or thermal imaging expert at 1 800 464 6372.
Related Cameras
View By IndustryDemo Request
Thank you for your interest in FLIR infrared cameras. Please answer just a few questions below, so we can get you the information you need.
If so, please help us by completing the following form:
- 320x256 InSb, 640x512 InSb and 320x256 InSb Low Background are all available in lab configurations
- Set of imaging electronics which provide all drive functions necessary to operate the FPA in single output imaging mode, generate NTSC (PAL) and digital video outputs
- Pour filled LN2 dewar configured for the ROIC device packaged in an 84 pin LCC (evacuation adapter and funnel included)
- 1.5 to 5.0 Si-Ge dewar window
- DC power supply
- CD containing Graphical User Interface Software
- BNC cable, S-Video Cable
- MWIR Optics available with bayonet flange mounting
- Bandpass filters available
- Dewar is offered with optional 4 position filter wheel
- Customer supplied 1" diameter dewar window
InSb Laboratory Camera
The InSb Laboratory Camera is a high-performance mid-wave infrared (MWIR) camera system based on an Indigo ROIC based focal plane array (FPA). This is either a 320 x 256 or 640 x 512 format Indium Antimonide (InSb) snapshot mode FPA. InSb exhibits excellent sensitivity over the 3.0–5.0 micron waveband, the standard bandpass for the camera. However, the laboratory configuration allows changing dewar windows and cold filters to support passbands between 1.5 to 5.0 microns.
What do all FLIR Infrared Cameras have in common?
The InSb Laboratory comes with the FLIR name behind it. That means it incorporates FLIR’s 30+ years of experience in thermal imaging. You get superior ergonomics, advanced signal processing, ambient temperature control and a host of other infrared camera and thermal imaging exclusives. FLIR offers the widest selection of IR cameras and thermal imagers, the best post-sale technical support, the world’s largest and most experience thermal imaging training organization – the Infrared Training Center – and award-winning customer service. Our core business is infrared thermal imaging. We invite you to call and speak with an infrared camera or thermal imaging expert at 1 800 464 6372.